Facebook

Customization and OEM / ODM Services

Our standard fixtures, wearing your brand — or a new fixture built around your brief. What can be changed, what it costs, and how tooling charges come back down as volume grows.

  • White logo as standard, up to two colours
  • Tooling credited from 500 units per model
  • Standard lead time 5–15 days
  • OEM keeps spare parts and libraries matching

01 — Scope

What can be customized

Customization runs from a single silk-screen change to a full ODM development. The table shows the usual scope and where the practical limits sit.

Customization matrix
Item What we change Practical note
Logo on the fixture Silk-screen or laser marking on the body, yoke or base plate Position must respect the existing housing; the artwork is placed where there is a clean panel
Model name Your model designation on the housing, rating label and manual Internally the fixture keeps its original platform code, which matters for spare parts and libraries
Cartons Colour box and master carton artwork, labels, barcodes Needs a print-ready file and a minimum run per model
Manual Language, layout and cover branding Translation supplied by the customer, or arranged on request
Flight case Size, interior layout, wheels, dividers, latches Built to the fixture and the quantity per case
Flight case logo Printed or applied logo on the case skin White as standard, up to two colours; on black laminate white reads best
Power and plug Voltage build and plug standard Must be fixed at order stage, not after production
Boot screen Logo shown on the display at power-up Available on models with a colour LCD
DMX channel map Channel order rearranged to match your existing fleet Assessed per model; a change may affect the standard library file
Colour finish Black as standard, white or a specified colour Non-standard colours need a sample approval and a minimum quantity

02 — Flight cases

Branded flight cases

Flight cases are built to the fixture, not bought off a shelf: interior foam cut to the body and yoke, a divider set to the quantity per case, castors rated for the loaded weight, and a lid that closes without pressing on the lens. Cases can be ordered with the fixtures or separately for an existing fleet.

Why white is the default. Case branding follows a simple rule that exists for a reason. Logo colour is white as standard, and we can print up to two colours. Production cases are laminated in black, and dark artwork on a dark skin disappears at exactly the moment you want the brand to be read — in a dark venue, at load-in. White holds up under stage light and truck wear; a second colour is used for an accent line, a model code or a division mark.

Send vector artwork (AI, EPS or PDF) with Pantone references. We return a digital proof before the first case is built, and a physical sample where the run justifies it.

03 — The difference

OEM and ODM — the difference that matters

The two terms are used loosely in this industry, so here is how we apply them.

OEM

Our product, your brand

The fixture stays our standard design, mechanically and electronically unchanged. We change the logo, model name, cartons, manual, plug and any packaging detail, and ship it as your product. This is the fastest and cheapest route, and it keeps full compatibility with our spare parts, fixture libraries and firmware releases.

ODM

A design built for you

We start from our platform and develop the product with you: housing shape, optical configuration, control layout, output targets, and where required a new mould. This takes longer, costs more up front, and ends with a fixture that is yours rather than a rebadged ours. ODM is the right choice when the product has to be genuinely different, not merely differently labelled.

04 — Cost structure

Design fee, tooling fee, and how they come down

Custom work is quoted in two parts: a design fee for the artwork, engineering and sampling, and a tooling fee where a mould or a dedicated jig is required. Both are stated on the quotation before anything starts, so there is no surprise at the end of the project.

Tooling is a one-time cost that volume amortises. Once a single model’s cumulative order quantity passes the agreed threshold — 500 units for most fixtures, 100 units for selected higher-value models — the tooling fee is reduced or waived according to the actual case. The threshold and the amount credited are confirmed in writing on the quotation, model by model, because they differ.

500 units per model — the usual cumulative threshold where the tooling fee is reduced or waived
100 units — the threshold for selected higher-value models

Put simply: small first orders carry the tooling, and volume earns it back. If your first order is large enough to clear the threshold outright, the credit is applied on that order rather than waiting for a second one.

05 — Artwork & IP

Artwork, IP and brand authorisation

We print your trademark on the understanding that you own it. Before production, the customer confirms in writing that it holds the rights to the logo and model name supplied, and that the artwork does not infringe a third party’s mark. We keep the files confidential and do not reuse them for any other customer.

Mould ownership follows who paid for it: where the customer funds the tooling, the tool is the customer’s, and can be transferred or held at our factory for future runs. Where we absorb the tooling under a volume commitment, the tool stays with us. Either way it is written into the agreement, not left to interpretation.

06 — Minimums

Minimums and lead time for custom orders

Custom work carries a minimum order per model, and a longer lead time than the standard 5–15 days, because artwork approval, sampling and any mould work sit in front of production. Both figures are quoted per project; a logo-only change on a standard fixture is a much shorter path than a new housing.

Where a custom order will be repeated, we hold the artwork, the approved sample and the tooling on file, so the second order runs at standard speed.

07 — Process

How a custom project runs

  1. Brief — target model, volumes, branding scope, destination market
  2. Feasibility — we check the housing, the optics and the electronics against the request
  3. Quotation — design fee, tooling fee, unit price, minimums, lead time
  4. Artwork and sample — digital proof, then a physical sample where required
  5. Approval — signed sample and artwork lock, then production
  6. Production and inspection — same QC line as standard product, video or third-party inspection on request

08 — FAQ

Questions we are asked most

Can I put my logo on the fixture and the flight case?

Yes — silk-screen or laser on the fixture, print on the case. Case logos are white as standard with up to two colours.

What do you need from me to start?

Vector artwork with colour references, the model or models, the quantity per model, and the destination market. Everything else we can work out together.

Is the tooling fee refundable?

It is reduced or waived once a single model’s cumulative volume passes the agreed threshold — 500 units for most models, 100 for selected high-value ones. The exact figure is written on the quotation.

Can you develop a completely new fixture?

Yes, that is ODM. It starts from our platform and can involve new housing, optics and control layout. Expect sampling and tooling lead time before the first production run.

Does rebranding affect spare parts or libraries?

No. An OEM rebrand keeps the original platform inside, so spare parts, fixture libraries and firmware all continue to match.

Can one colour of logo be used instead of white?

On a black case, white is the default because it stays legible in a dark venue. A second colour can be added for an accent or a model code; a fully non-white scheme is possible but needs a sample to confirm contrast.

Next step

Tell us the model, the quantity and the market

Send vector artwork with colour references, the models you have in mind and the quantity per model. We will come back with the artwork route, the fees and the timeline for your project.

Contact us about your project